Balboa X-P332 Daughter Board
G1920
Balboa daughter board for VS and EL control systems (15 amp).
Product Description
The Balboa X-P332 Daughter Board is an expansion module designed to enhance the functionality of Balboa's VS and EL series control systems by providing an additional output for a second two-speed pump. This expansion is particularly beneficial for spa configurations requiring multiple pump operations.
Key Features:
- Additional Two-Speed Pump Support: Enables the integration of a second two-speed pump into compatible control systems, expanding the spa's operational capabilities.
- Integrated 30-Amp Fuse Protection: Equipped with a 30-amp fuse to safeguard the connected pump and control system from electrical overloads.
- Compatibility: Designed for use with Balboa's VS520SZ and BP2000 spa packs, ensuring seamless integration and reliable performance.
Installation Guidelines:
- Power Down the System: Ensure the spa control system is completely powered off to prevent electrical hazards during installation.
- Mount the Daughter Board: Secure the X-P332 board within the control system enclosure. If mounting hardware is required, it must be obtained separately.
- Establish Electrical Connections:
- Connect the J7 wire from the X-P332 to the J13 connector on the main board.
- Attach the W1 wire from the X-P332 to the Red AC terminal on the main board.
- Configure System Settings: Adjust the jumper settings on the main board as follows:
- For VS50xZ compatibility mode, place the jumper on J12 over pins 2 and 3.
- For VS51xZ, VS5xxSZ, or VS5xxDZ compatibility mode, place the jumper on J12 over pins 1 and 2.
- Verify Connections: Double-check all connections to ensure they are secure and correctly positioned.
- Restore Power: Once all connections are confirmed, power on the system and test the functionality of the newly connected pump.
Safety Precautions:
- Professional Installation Recommended: Due to the technical nature of the installation, it is advisable to have a qualified technician perform the setup to ensure safety and proper operation.
- Adhere to Electrical Standards: Ensure all wiring and connections comply with local electrical codes and standards to maintain system integrity and safety.
By integrating the Balboa X-P332 Daughter Board into your spa's control system, you can effectively expand its capabilities to support an additional two-speed pump, enhancing the overall functionality and user experience of your spa setup.
Product Attributes
Product Type: Daughter Board |
No. of Pumps: 2 |
Length: 3.20" |
Width: 1.70" |
Manufacturer: Balboa |
Product Attributes
Product Type: Daughter Board |
No. of Pumps: 2 |
Length: 3.20" |
Width: 1.70" |
Manufacturer: Balboa |
Product Description
The Balboa X-P332 Daughter Board is an expansion module designed to enhance the functionality of Balboa's VS and EL series control systems by providing an additional output for a second two-speed pump. This expansion is particularly beneficial for spa configurations requiring multiple pump operations.
Key Features:
- Additional Two-Speed Pump Support: Enables the integration of a second two-speed pump into compatible control systems, expanding the spa's operational capabilities.
- Integrated 30-Amp Fuse Protection: Equipped with a 30-amp fuse to safeguard the connected pump and control system from electrical overloads.
- Compatibility: Designed for use with Balboa's VS520SZ and BP2000 spa packs, ensuring seamless integration and reliable performance.
Installation Guidelines:
- Power Down the System: Ensure the spa control system is completely powered off to prevent electrical hazards during installation.
- Mount the Daughter Board: Secure the X-P332 board within the control system enclosure. If mounting hardware is required, it must be obtained separately.
- Establish Electrical Connections:
- Connect the J7 wire from the X-P332 to the J13 connector on the main board.
- Attach the W1 wire from the X-P332 to the Red AC terminal on the main board.
- Configure System Settings: Adjust the jumper settings on the main board as follows:
- For VS50xZ compatibility mode, place the jumper on J12 over pins 2 and 3.
- For VS51xZ, VS5xxSZ, or VS5xxDZ compatibility mode, place the jumper on J12 over pins 1 and 2.
- Verify Connections: Double-check all connections to ensure they are secure and correctly positioned.
- Restore Power: Once all connections are confirmed, power on the system and test the functionality of the newly connected pump.
Safety Precautions:
- Professional Installation Recommended: Due to the technical nature of the installation, it is advisable to have a qualified technician perform the setup to ensure safety and proper operation.
- Adhere to Electrical Standards: Ensure all wiring and connections comply with local electrical codes and standards to maintain system integrity and safety.
By integrating the Balboa X-P332 Daughter Board into your spa's control system, you can effectively expand its capabilities to support an additional two-speed pump, enhancing the overall functionality and user experience of your spa setup.